Skill Level: Easy

Before starting, please read our Disclaimer. By using this website you agree to these terms.

Removing your bumper is very simple as long as you know where to look. All you need is a phillips-head screwdriver, a 13 mm socket wrench, and something flat to pry with, like a knife or flat-head screwdriver.

Step 1:

Remove the rubber plug on the end-cap. There is one on each side. These were pretty tight, but my pocket knife worked well to pry them out without damaging them. You'll need a phillips-head screwdriver to remove the screw.

Step 2:

Move to the front of the bumper and carefully pry back the two horizontal rubber pads. There will be one 13 mm bolt under each pad. Simply remove these and the bumper should basically fall off. You're done!

27 July 2015